efa inventory device interface list

Displays the list of interfaces and details for the specified IP address, including the application state that indicates whether the device configuration is synchronized with XCO or has drifted (refreshed or deleted).

Syntax

efa inventory device interface list [--ip ip-addr | --type interface-type { physical | loopback | ve | po | all }| --admin-state state { up | down | all }| --oper-state oper-state { up | down | all } | --rme list ]

Parameters

--admin-state { up | down | all }: Specifies the administrative state of interfaces of the device. The default is all.
--ip ip-addr: Specifies the IP address of the device for which you want to see a list of interfaces. For example: 10.1.1.13,10.1.1.50,10.1.1.101.
--oper-state { up | down | all }: Specifies the operational state (line protocol) of interfaces of the device. The default is all.
--rme list: Lists redundant management-enabled interface. The default is all.
--type { physical | loopback | ve | po | all }: Specifies the type of interfaces on the devices. The default is physical.

Examples

The following example shows a portion of typical output for the command.

$ efa inventory device interface list --ip 10.20.62.145
+--------------+------+----------------+--------------+-------------
|   DeviceIP   | Name | Interface Type | Admin Status | Oper Status |
+--------------+------+----------------+--------------+-------------+
| 10.20.62.145 | 0/1  | ethernet       | up           | up          |
+              +------+----------------+--------------+-------------+
|              | 0/2  | ethernet       | up           | down        |
+              +------+----------------+--------------+-------------+
|              | 0/3  | ethernet       | up           | down        |
+              +------+----------------+--------------+-------------+

Interface Details
--- Time Elapsed: 79.1761ms ---